Landoll Brillion P Series Operator's Manual page 12

ASSEMBLY
3. If a center bracket is included with the machine, it
must be installed next. Start by clamping the center
brackets between the pair of angle iron clips. Use
Grade 5, 1/2" x 1-3/4" Screws with 1/2" Lockwashers
and Nuts. See Figure 2-2.
2-2
4. Place the center bracket at the center of the center
5. Attach the SMV Bracket to the Center Bracket U-bolt
Figure 2-2: Center Bracket Assembly
frame. Fasten it using 5/8" x 5-1/2" deep U-bolts or,
on 18' and 20' machines, a pair of straps and 5/8" x
8" Machine Bolts.
and secure with 5/8-11 Hex Nuts and Washers.
9J017