Parking The Transport Pulverizer - Landoll Brillion P Series Operator's Manual

OPERATION

Parking the Transport Pulverizer

The best way to park the pulverizer is to place the
machine in its desired location. Once there, remove the
transport pin and place it in the rear-most hole. Lower the
machine to the ground. Place blocks in front and behind
the pulverizer to prevent it from rolling when unhitched.
Lower the jack and adjust height of drawbar to allow for
unhitching. Then unhitch the pulverizer.
If you must park the pulverizer with the wheels in
transport position, start by placing the jack in the
foremost position. Place the blocking in front and behind
the pulverizer wheels to prevent rolling. Finally, adjust the
jack height to allow for unhitching and disconnect of the
pulverizer.
3-2 9J017