Table of Contents
Advertisement
852-1322
10.8.3 Backup/Restore
The Backup/Restore tab page allow the user to back up the current configuration of the
switch to a file, save the configuration file on the local PC, or upload a new configuration
from a previously saved configuration file. Figure "WBM "Maintenance" Page – "Backup/
Restore" Tab" shows the Backup/Restore tab page where it can be divided into two parts:
Backup the Configuration and Restore the Configuration.
When clicking on the [Download] button on the upper part of the page (Backup the Con-
figuration box), the user will be prompted to save or keep the file name
852-1322_XXX.XXX.XXX.XXX.ini by the Web browser. Choosing to Save File will back
up the switch's current configuration to your local drive on the local PC.
To restore a configuration file to the switch, click on [Browse...] button to open a file
chooser to select a configuration file from the local drive of your PC. Before clicking the
[Upload] button, the user can check any of the options above the file name, which are
"Keep the username & password configuration" and "Keep the network configuration".
These two options will help to prevent the users from un-necessary logging-in to the
switch using previously stored username, password, and/or network configuration after
settings are restored.
10.8.4 Reboot
A simple reboot function is provided in this tab page requiring only one single click on the
[Reboot] button as shown in Figure "WBM "Maintenance" Page – "Reboot" Tab".
Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 61: WBM "Maintenance" Page – "Backup/Restore" Tab
Configuration in the WBM
79
Advertisement
Chapters
Table of Contents
