Configuration in the WBM
10.8.2 Reset to Default
When the switch is not working properly, the user can reset it back to the original factory
default setting by clicking on the [Reset] button as shown in Figure "WBM "Maintenance"
Page – "Reset to Default" Tab". When the switch is restarted, the web browser will be re-
directed to the login web page as depicted in Figure "Login Web Page". Note that there is
no physical reset button on the front panel of the box; therefore, the user will have to ei-
ther using the [Reset] button on this page.
78
Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 58: WBM "Maintenance" Page – "Firmware Upgrade" Tab
Figure 59: WBM "Maintenance" Page – "Reset to Default" Tab
Figure 60: Login Web Page (Example)
852-1322