Turnpoints; Airports - LX Navigation LX10K User Manual

LX k
Device setup
. . .

Turnpoints

Turnpoint les, in the .cup le format, are not supplied by LX navigation, but can usually be
found at competitions, various webpages or from club manager and club mates. As a starting
point, you can check the Open ight maps. You can even create your own turnpoint les either
by hand, or using different software.
In order to use turnpoint les on your LX
to do this, you need to have the le saved to the root of your microSD card. Once the microSD
card is inserted go to Load sub-menu and select the le you wish to transfer to the LX
internal memory.
Now go to the Select sub-menu and select which of the les in the LX
you wish to have active.
You can have multiple turnpoint les active at the same time.
The LX
. . .

Airports

Airport les, in the .af le format, are supplied by LX navigation exclusively. For the latest
available database les, check the Database part of LX webpage.
The airports le holds the frequencies to all airports, which is why it is especially important to
use the latest database les available. If inconsistencies are found in the les, please refer
them to the LX navigation support email.
In order to use a certain airport le, rst you need to copy it to the LX
through the Load sub-menu, and then select it as active through the Select sub-menu. Only
one airports le can be active at a time.
The LX
Device manual
k, rst you need to copy them to the device. In order
NOTE
k requires turnpoints in the .cup le format.
NOTE
k requires airport les in the .af le format.
Public
Document name:
Document revision:
k's internal memory
k's internal memory,
LX KUM
R
k's