Load Task; Flarm Net - LX Navigation LX10K User Manual

LX k
Device setup
. . . Airspace
Airspace les, in
LX navigation database part of webpage, as well as supplied by competition directors,
club managers, club mates and other readily available database sources.
In order to use a certain airspace le, rst you need to copy it to the LX
through the Load sub-menu, and then select it as active through the Select sub-menu. Multiple
airspace les can be selected at once.
The LX
. . .

Load task

Task les are stored into the .cup le usually, and consequently the same rules apply as for the
turnpoint les.
Once opened, the Load task sub-menu will show all .cup les with internal tasks. You can
select the desired turnpoint le and a selection of tasks saved to this le will be found.
Choosing the task will set the selected task as the current active task.
The LX k is capable of sending task declarations to external devices (the MOP,
Flarm, etc.). This happens when one of the following conditions is met:
• The LX
• The LX
• The LX
• Whenever we exit the task edit page in the Task navigation page.
The LX
. . .

Flarm NET

The LX k allows the utilization of Flarm NET databases. If a database is used, and a Flarm
object with a Flarm ID found in the database shows up, the LX
info from the FlarmNET database and assign it to the said object.
Device manual
the .cub le
k requires airspace les in the .cub le format.
k receives a task from an external device through the User port
k receives a task from an external device through Bluetooth
k receives a task from a .cup le through the Load task menu
k requires task les in the .cup le format.
Document name:
Document revision:
format, can be
NOTE
NOTE
NOTE
Public
LX
found on both
k's internal memory,
k will automatically use the
KUM
R
the