Turning The Lx K Off; Turning The Indicator On And Off; A Word On Internal Battery And Ight Mode - LX Navigation LX10K User Manual

LX k
Basic operation
. Turning the LX
The LX k can be turned off in different ways, depending on the con guration you have.
All units will start the shutdown process once the power supply is cut from the main power
lines, unless in ight mode.
There is a possibility of a manual shutdown by going to Setup > Shutdown and con rming by
choosing 'Yes'.
In case a device requires a force shutdown, there is a possibility of performing a hard
shutdown by pressing and holding the ZOOM push-rotary knob for

.6 Turning the indicator ON and OFF

In all cases of normal operation, the LX
special handling in order to turn on or off.
The indicator will turn on automatically once the main unit has been turned on, and will shut
down once the main unit has been shut down.
If one wishes to perform a hard shut down of the vario indicator, it can be done by pressing
and holding for seconds the push rotary knob on the vario indicator.
.

A word on internal battery and ight mode

All LX k devices (including the vario indicator) have a built-in reserve battery, intended for
supplying the unit with power in case your aircraft losses its main power supply. The reserve
battery is not intended for use on the ground, which is why the device can not be turned on, on
reserve battery alone.
Flight mode is a term describing a state in which the LX
ying. For getting into ight mode, one of the following parameters must be met:
• GPS lock is present, and
• GPS speed is above
• airspeed larger than
• signi cant movement in vertical speed
Once in ight mode, the LX
operating as long as there is internal power, or until the main power supply is reestablished.
The internal battery powers all of the internal features of the LX
described in this manual. The LX
providing you vario information, sound warnings, complete navigation, etc.
Device manual
k off
k vario indicator (be it analog or digital) requires no
m/s, or
m/s is present, or
k will not turn off if the main power supply is cut, but continue
k will continue logging, with IGC seal intact, it will continue
Public
Document name:
Document revision:
seconds.
k is, when the device detects it is
k, which covers everything
LX KUM
R