User Port Connectivity - LX Navigation LX10K User Manual

LX k
Connectivity
xxx), select it and press pair. When prompted for a password, type in '
The following settings should be set:
• Port - COM : (Bluetooth)
• Speed - 8
• Parity - None
• Bits - 8
Press OK and the Oudie will exit back to the main screen.
6. . . Setting up the LX
To set up LX k NMEA communication, needed for the proper functioning of XC Soar, go to
Setup > NMEA and set the NMEA baude rate to 8
Now check the following tick boxes:
• GPGGA
• GPRMC
• GPRMB
• LXWPx
Now go to the Oudie's Menu > Settings > Hardware > Device and select 'LX navigation'
(pending).
If you go to the Terminal, you should see communication owing, in the form of NMEA
sentences.
Now your devices are communicating.
The Oudie will receive various ight parameters (IAS, vario info, Flarm objects and warnings,
GPS, etc.) from the LX
and control various ight parameters, like MC, bugs and ballast.
6.

User port connectivity

Various devices can be connected to the LX
rectional NMEA communication, using the RS
we will go through two main examples, an Oudie and a KRT radio, representing PNA/PDA
devices and radio transceivers, respectively.
Device manual
k
k, and the Oudie will be able to send a ight declaration to the LX
Public
Document name:
Document revision:
• Stop bit -
• Set DTR - Checked
• Set RTS - Checked
.
• LXDT
• LXBC
• PFLAx
k's User port. The User port is used for bidi-
protocol. Since the list of devices is long,
LX KUM
R
'.
k
8