Club Mode; Shutdown - LX Navigation LX10K User Manual

Hide thumbs Also See for LX10K:
Table of Contents

Advertisement

LX
k
Device setup
. . .

Club mode

The Club mode is used for setting up Club pilot pro les and editing them. By 'Club' we mean
generic pilot pro les, which are password protected and can only be changed by a 'Club
manager'. Regardless, the same procedure can be used to password protect any pilot pro le.
Even thought a pro le is set as a 'Club pro le' changes will still be made, but not saved, if not
in 'Club mode'. For a detailed explanation, check the text below.
Engaging the Club pro le:
. Go to Setup > Service > Password and type in '
. Mark 'Club mode' under 'Service'
. Go to Pilot > mark 'Club pro le'
The logic behind the club pro le is that with this procedure, you lock it as is. However, this
does not mean that the pro le can not be changed, but rather that no changes are permanent,
and after restart the changes will revert to the state you had your pro le in, when it was locked
with the password.
Lets say you create your pro le and set everything up. You lock it (set it as Club pro le) with
the procedure above. Then after a few days another pilot ies the plane and wants to use your
pro le, as it is a good one, but would like to change one thing, like the reserve altitude. He can
go to the Setup and change the reserve altitude and the system will use his reserve altitude
as long as it is turned on. This means he can go and y and use the settings that he altered.
After he lands, extracts the ight and turns the device off, the settings will revert to the ones
you have set, so the next time you go ying, the reserve altitude will be the one you've set for
yourself.
The only way to change your settings for good is to again type in the above password, and
then change them. The password is meant for a club administrator ('admin').
If a new pilot pro le is added, while in Club mode, it will not be saved, after the
. .

Shutdown

Performs the shutdown sequence for the device.
If select while in ight, the LX
Device manual
NOTE
device has been restarted.
WARNING
k will nish the ight and shut the device off.
Public
Document name:
Document revision:
8 '
LX
KUM
R
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LX10K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents