LX Navigation LX10K User Manual page 50

LX k
Advanced operation
Once the LX
countdown to nishing your ight. Once the countdown has nished, it will
calculate the security and save the .igc le to its internal memory.
• GPS lock
• Ground speed less than
• Indiacted airspeed less than
• Altitude less than
If you wish to forcefully nish a ight, prior to the LX
procedure, you can do this by going to the 'Flight statistics' page and pressing the
right push-rotary knob and con rming the 'End ight?' question, as shown in gure
If the LX k turns off due to both the internal and external power supply being
Device manual
k determines that you are not in ight, it will start the
The conditions for nishing a ight are:
m/s
m QNH
Figure . 'End ight?' dialog box
WARNING
drained, the IGC ight might not get the IGC seal.
Document name:
Document revision:
NOTE
m/s
NOTE
.
Public
LX
minute
k starting the nish
KUM
R