Connecting An Oudie Or Other Pna/Pda Device; Establishing A Bluetooth Connection; Setting Up The Lx - LX Navigation LX10K User Manual

LX k
Connectivity
6. . .

Setting up the LX

To set up LX k NMEA communication, needed for the proper functioning of XC Soar, go to
Setup > NMEA and check the following tick boxes:
• GPGGA
• GPRMC
• GPRMB
• LXWPx
• LXDT
• LXBC
• PFLAx
Your LX k will now send the checked NMEA sentences to the Android phone.
6. . . Setting up XC Soar
Open XC Soar on your phone, go to Con g > Devices > B: > Edit and set up the following items:
• Port - select the port with the same name as your LX
xxxx)
• Driver - LX navigation (pending)
• Passthrough device - Off
Once done, you should see the connection state go from 'Not connected' to 'Connected; Baro;
Airspeed; Vario; FLARM'.
Now the two devices are communicating.
6. .

Connecting an Oudie or other PNA/PDA device

In order to connect an Oudie, or similar PDA/PNA device, the following steps are required:

. Establishing a Bluetooth connection

. Setting up the LX
. Setting up the Oudie
6. . . Establishing a Bluetooth connection
To set up a Bluetooth connection, go to Setup > Network > Wireless mode and choose
Bluetooth server.
Exit the Wireless mode setup by going back and open the Wireless setup menu. You will nd
your device's Bluetooth name and password, needed fro establishing a Bluetooth connection.
Now take your Oudie, go to Menu > Settings > Input > Bluetooth... and press Lookup. The
Oudie will now search for nearby Bluetooth devices. Once your LX
Device manual
k
k
Public
Document name:
Document revision:
k's Bluetooth name (LX LX
k appears (LX LX
LX KUM
R
k
k