Alarm Functions / Light - Silvercrest KH 2415 Operating Instructions Manual

Alarm functions / Light

• Place the alarm slide switch
– "ALM ON", to switch the alarm function on.
An alarm symbol appears in the display.
– "ALM OFF", to switch the alarm function off.
The alarm symbol in the display extinguishes.
– "SNZ", to switch the alarm function on and,
at the same time, the snooze function.
• When you press on the button
t
"SNOOZE / LIGHT" and ...
– the function "ALM ON" has been selected, then
you finish the alarm function for this day. The
alarms sounds again on the following day.
– the function "SNZ" has been selected, then you
interrupt the alarm function for 5 minutes.
On its expiration, the alarm sounds again.
– the function "ALM OFF" has been selected, then
you switch on the display background illumination
(light) for approx. 3 seconds.
• When the alarm sounds the display illumination
is switched on at the same time.
s
into the position ...
- 9 -