Kinetix 5700 iTRAK Power Supply and iTRAK Bus Conditioner Module
Mount Bus Conditioner Modules on an 2198T-Exxx800400, iTRAK System, 0.8 x 0.4 m (2.6 x 1.3 ft) Rectangle or Larger
Mount on Base Plate
Mount on Spine Bars
Bus Conditioner Module Access
Power Configuration
The iTRAK power supply is intended to be run from only grounded-wye power distribution.
ATTENTION: To avoid the risk of electrical shock and equipment damage, run the iTRAK power supply from only a grounded-wye power distribution. Do not run
the power supply from an ungrounded, corner grounded, or impedance grounded power distribution. Verify the power distribution before you wire and apply
power.
6
Bus Conditioner Modules
160.0
(5.905)
Base Plate
Rockwell Automation Publication 2198T-IN001C-EN-P - October 2019