Kinetix 5700 iTRAK Power Supply and iTRAK Bus Conditioner Module
Wire the iTRAK PS Ready (IR) Connector
The iTRAK PS relay output is part of a required I/O interface with the gateway and is connected to the gateway through the digital USB I/O
module.
iTRAK PS Ready (IR) Connector Wiring - Connector Plug
iTRAK PS Ready (IR) Connector Plug
-
+
Table 1 - iTRAK PS Ready (IR) Connector Plug Specifications
Description
Pin
Signal
2
-
iTRAK power supply
ready
1
+
see
Connect an iTRAK Power Supply to a System on page 21
14
2198T-W25-ER
iTRAK Power Supply
(front view)
MOD
NET
2
1
I/O
1
6
iPS RDY
5
10
Recommended Wire Size
Strip Length
mm2 (AWG)
mm (in.)
0.14...2.5
7.0 (0.28)
(26...12)
for wire diagram information.
Rockwell Automation Publication 2198T-IN001C-EN-P - October 2019
Torque Value
N•m (lb•in)
0.4...0.5
(3.5...4.4)