Table of Contents
Advertisement
Kinetix 5700 iTRAK Power Supply and iTRAK Bus Conditioner Module
The Kinetix® 5700 iTRAK® power supply with 458...747V DC input provides continuous output power and current to iTRAK motor modules by
using two controlled DC outputs with continuous current of 12.5 A and peak current of 25 A. The iTRAK bus conditioner module provides
additional DC bus stiffness with local capacitance to the track. Use it whenever you use the iTRAK power supply unless advised by Rockwell
Automation.
See the Kinetix 5700 Servo Drives User Manual, publication
detailed information on how to wire, apply power, troubleshoot, and integrate with ControlLogix® EtherNet/IP communication modules or
CompactLogix™ 5370 controllers.
Unpack
Remove all packing material, wedges, and braces from within and around the components. After unpacking, check the item nameplate catalog
number against the purchase order.
Parts List
The iTRAK power supply ships with the following:
• DC bus-bar link, 100 mm
• Wiring-plug connector set with 24V control input power (CP), digital inputs (IOD), iTRAK power supply ready (IR) output, two iTRAK
24V output (ICP), and two iTRAK bus output (IDC) connectors
• These installation instructions, publication 2198T-IN001
TIP
Replacement connector sets are also available. See the iTRAK System Technical Data, publication 2198T-TD001, for more information.
The iTRAK bus conditioner module ships with the following:
• M6 x 1, 30 mm mounting screws, quantity 4.
2
2198-UM002
and iTRAK System User Manual, publication
Rockwell Automation Publication 2198T-IN001C-EN-P - October 2019
2198T-UM001
for
Advertisement
Table of Contents
