Commission - Allen-Bradley Kinetix 5700 iTRAK Installation Instructions Manual

Wiring Multiple iTRAK Power Supplies to the USB I/O
When multiple iTRAK power supplies are connected to the same 2198-P
• Connect each iTRAK power supply to the same USB I/O module.
• Connect each iTRAK Power Supply Ready relay output string serially through all iTRAK power supplies.
• Connect the OUT 00 NO output on the USB I/O module to the ENABLE input of all iTRAK power supplies.
• Connect the OUT 01 NO output from the USB I/O module to the CLEAR FAULT input of all iTRAK power supplies.

Commission

To assist you when you commission your power supply, sample Studio 5000 Logix Designer® application is available through the Rockwell
Automation Knowledgebase. Follow these steps to access the sample code.
1. From a browser window type https://rockwellautomation.custhelp.com/.
2. Under What Do You Need Help With?, click Answer ID.
3. In the search dialog box, type
2198T-W25K-ER
Kinetix 5700 iTRAK Power
Supply
1
ENABLE
2
COM 24V COM
Digital Input
3
CLEAR
(IOD) Connector
FAULT
4
24V COM
COM
5
SHIELD
SHLD
ITRAK Power Supply
RDY-
Ready (IR) Connector
RDY+ 24V
2198T-W25K-ER
Kinetix 5700 iTRAK Power
Supply
1
ENABLE
2
24V COM
COM
Digital Input
3
CLEAR
(IOD) Connector
FAULT
4
24V COM
COM
SHLD SHIELD
-
RDY-
ITRAK Power Supply
+
Ready (IR) Connector
RDY+
778917 and click the search icon.
Rockwell Automation Publication 2198T-IN001C-EN-P - October 2019
Kinetix 5700 iTRAK Power Supply and iTRAK Bus Conditioner Module
DC-bus power supply, follow these guidelines.
OUT 00 NO
(1)
24V
OUT 00 C
OUT 01 NO
(1)
24V
OUT 01 C
IN00 A
24V COM
IN00 B
(1)
(1)
USB I/O
23