Information On The Power Supply/Battery Charging - Otto Bock 1B1-2 Meridium Instructions For Use Manual

Safety
CAUTION
Signs of wear and tear on the product components
Falling due to damage or malfunction of the product.
► Regular service inspections (maintenance) are mandatory in the interest of patient safety and in order to main­
tain operating reliability and protect the warranty.
NOTICE
Improper product care
Damage to the product due to the use of incorrect cleaning agents.
► Only clean the product with a damp cloth and mild soap (e.g. 453H10=1 Ottobock DermaClean).
NOTICE
Mechanical damage to the product
Change in or loss of functionality due to damage.
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readiness for use.
► In case of changes in or loss of functionality, do not continue using the product (see "Signs of changes in or
loss of functionality during use" in this section).
► Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's customer service,
etc.).
INFORMATION
When exoprosthetic components are used, the use of control functions which are performed hydraulically or
movement of the component in the footshell can cause movement noise. This kind of noise is normal and unavoid­
able. It generally does not cause any problems. If movement noise increases noticeably during the lifecycle of the
component, the component should be inspected by an authorised Ottobock Service Centre immediately.
Signs of changes in or loss of functionality during use
Decreased forefoot resistance or changes in roll-over behaviour are noticeable indications of loss of functionality.

4.4 Information on the Power Supply/Battery Charging

CAUTION
Charging the prosthesis without taking it off
> Falling due to walking and getting caught on the connected battery charger.
> Falling due to unexpected behaviour of the prosthesis because of changed damping behaviour.
► Instruct the patient that the prosthesis must be taken off before it is charged.
CAUTION
Charging the product with damaged power supply unit/charger/charger cable
Falling due to unexpected behaviour of the product caused by insufficient charging.
► Check the power supply unit, charger and charger cable for damage before use.
► Replace any damaged power supply unit, charger or charger cable.
NOTICE
Use of incorrect power supply unit/battery charger
Damage to product due to incorrect voltage, current or polarity.
► Use only power supply units/battery chargers approved for this product by Ottobock (see instructions for use
and catalogues).
8 1B1-2=* Meridium