Program The Emergency Phone From The Keypad; Dial From The Keypad; Figure 24 Operator Call Button - Mircom TX3 Series Installation And Operation Manual

4.
Figure 24. Operator Call Button
5.
6.
7.
4.4

Program the Emergency Phone from the Keypad

You can program the Emergency Phone model TX3-EMER-200KS from the
keypad. See LT-979 on the USB disk or Mircom website for details.
4.5

Dial from the Keypad

You can dial the numbers from the keypad instead of pressing the Emergency
Call Button or the Operator Call Button.
To dial the Emergency Call Button from the keypad
1.
2.
TX3 Emergency Phone Installation and Operation Manual
Version 2
LT-6113 Copyright 2017
The details for the Operator Call Button appear.
In the Phone number field, type the phone number that the Operator
Call Button should dial (or SIP ID if you are using a VoIP modem).
Click OK.
Click the Send button
Dial 9 9 9 1 on the keypad, and then press the telephone key.
Press the star key to hang up.
to send the job to the Emergency Phone.
*
Programming
43