Connect To One Or More Emergency Phones; Figure 18 Create New Job - Mircom TX3 Series Installation And Operation Manual

3.3.2

Connect to one or more Emergency Phones

If you do not have an existing TX3 network and you are connecting to one or
more networked Emergency Phone, follow these instructions.
You must:
1.
2.
3.
4.
Follow the instructions below to complete these steps.
To create a new job
1.
2.
Figure 18. Create New Job
3.
4.
TX3 Emergency Phone Installation and Operation Manual
36
LT-6113 Copyright 2017
Create a new job
Delete the panel
Add the Emergency Phone
Connect to the Emergency Phone
Open the TX3 Configurator.
Click File > New Job.
The Create New Job window appears.
Type a name and description for your job. The description is optional.
Under Create from a template, select Basic TCP Telephone
Access System.
Connecting
Version 2