Figure 21 New Job With Emergency Phone; Figure 22 Online Events - Mircom TX3 Series Installation And Operation Manual

Figure 21. New Job with Emergency Phone
6.
Connect to the Emergency Phone
1.
2.
3.
4.
Figure 22. Online Events
5.
TX3 Emergency Phone Installation and Operation Manual
Version 2
LT-6113 Copyright 2017
The Job tree on the left shows the Emergency Phone that you just added.
Repeat steps 1-5 for each Emergency Phone on the network.
Select Network in the job tree.
In the Network Configuration window, select the method that you are
using to connect the computer to the Emergency Phone.
Click the Connect button.
Look for the message that the panel or panels are online in the Online
Events pane at the bottom of the window.
Go to Chapter 4 on page 40 for instructions on programming the
Emergency Phone.
Connecting
39