Disabling Multiple Projectors; Disabling A Slave Projector; Deleting A Slave Projector - Christie CP2308 User Manual

Hide thumbs Also See for CP2308:

Table of Contents

1. On the master projector touch panel, tap Service Setup > Multi-Projector Setup.

2. Under Master Projector Settings, tap Multi-Projector Sync of Content.

The color of the slider turns to green to indicate content synchronization is active. When

enabled, ingested content on the master projector is synchronized to all slave projectors

automatically.

Disabling multiple projectors

Disable multi-projector settings when the second projector is not required to display content.

1. In the left navigation menu, tap Service Setup > Multi-Projector Setup.

2. Tap the Multi-Projector Control slider.

The color of the slider changes to gray to indicate it is inactive.

Disable a slave projector when it is no longer required or when it is replaced by another projector.

1. In the left navigation menu, tap Service Setup > Multi-Projector Setup.

2. Tap the slider in the Enabled column of the slave projector you want to disable.

The color of the slider changes to gray to indicate it is inactive.

Delete a projector from a multi-projector configuration when it is no longer required or when it is

replaced by another projector.

1. In the left navigation menu, tap Service Setup > Multi-Projector Setup.

2. In the Delete column of the slave projector you want to delete, tap Delete.

3. To confirm the deletion, tap Delete.

CP2308 User Guide

020-102535-03 Rev. 1 (08-2018)

Setting up multiple projectors

Table of Contents