Setting Up An Integrated Media Block; Selecting Imb Preferences; Activating Imb Marriage - Christie CP2308 User Manual

Hide thumbs Also See for CP2308:

Table of Contents

Setting up an integrated

media block

You can configure CP2308 to work with different models of integrated media blocks, including the

Christie IMB.

Choose from the available options to set the type of integrated media block (IMB).

1. To set the type of IMB, tap Service Setup > Preferences.

2. Tap IMB.

3. In the type list, select the type of IMB you are using.

The system prompts you to reboot the projector.

4. To apply the changes, tap Reboot.

5. After the projector has restarted, log in with your user account.

After selecting the IMB type, you must install the IMB and complete marriage to display secure

content. You cannot complete marriage remotely.

The marriage wizard requires you to confirm that the IMB has not been tampered with.

1. Install the IMB in the available slot on the projector.

For more information, see the Christie IMB-S3 Installation and Setup Manual (P/N:

020-102582-XX) or the documentation provided by the IMB manufacturer.

2. In the left navigation menu, tap Service Setup > Marriage Setup.

3. Tap Start and confirm that the security manager (SM), service door, and marriage ring are

secure.

4. Tap Next and complete the marriage checklist, confirming that the following are secure:

•

All fan clips are tightened on the four fan pack at the front of the light engine

compartment.

•

Fan pack spring pins are locked in place to prevent removal of the light engine fan pack.

•

Projector front cover is installed.

5. Tap Next and enter the Marriage user and password credentials.

6. Tap Login.

7. To start the marriage process, press the Marriage button on the projector within 30 seconds.

CP2308 User Guide

020-102535-03 Rev. 1 (08-2018)

Table of Contents