Table of Contents
Advertisement
The Troubleshooting Guide, shown below, is included to help you quickly locate problems that can happen using your
2110 Coulter Chisel. Follow all safety precautions stated in the previous when making any adjustments to your
machine.
PROBLEM
UNIT NOT PULLING EVEN
UNEVEN DEPTH
UNIT SIDE DRAFTS OR MOVES SIDE
TO SIDE
SHANKS PLUGGING WITH RESIDUE
BACK ROW OF SHANKS PLUGGING
WITH RESIDUE
SHANKS NOT PENETRATING
WHEEL BEARING FAILURE
HYDRAULIC - COULTER LIFT
CYLINDERS NOT FULLY EXTENDING
Troubleshooting Guide
PROBABLE CAUSE
Coulter gangs uneven depth
Unit not level when under power in the
field
Excessive coulter gang depth or down
pressure
Tire pressure too low
Unit not level front to rear
Lift wheels not carrying enough weight
Unit not level front to rear
Unit not level
Coulters not cutting residue
Twisted shovels throwing soil wrong
direction
Heavy residue
Unit not level
Excessive coulter depth
Points worn
Triple-lip seals not installed correctly
Lift cylinders not in phase
Cylinders not installed in proper series
Hoses not properly connected
Chapter 5
SOLUTION
Adjust depth/rephase coulter gang
cylinders (See "Hydraulic Coulter
Gang Lift System" on page 4-4.)
Level unit front to rear (See "Leveling
(Front-to-Rear)" on page 4-5.)
Reduce coulter depth.
Check inflation.
Adjust unit to be level.
Adjust depth stop and raise implement.
Adjust unit to be level.
Level machine (See "Leveling
(Front-to-Rear)" on page 4-5.)
Adjust coulter depth
Install shovels (See Figures 2-1 thru
2-10.)
Install optional offset shank mounts to
stagger back row of shanks (See
"Offset Shank Mount Installation
(Option)" on page 3-20.)
Level unit front to rear (See "Leveling
(Front-to-Rear)" on page 4-5.)
Reduce depth
Install new points
Install seals with the lips pointing outward
away from the hub.
Fully extend cylinders and hold hydraulic
lever until all cylinders are fully
extended.
Wing cylinders are smaller diameter than
center cylinders. Reinstall cylinders
properly.
Check hose routing
5-1
Advertisement
Table of Contents
