Discover The Tdai-1120 Setup Page - Lyngdorf Audio TDAI-1120 Owner's Manual

Using the vTuner menu will allow you to play all radio stations available on
the internet
Note that through the website you can save up to 5 stations as pre-sets,
which then are directly available from the input selector on the front or
through the Lyngdorf Remote Application.

Discover the TDAI-1120 setup page

When the TDAI-1120 is connected to your local network you can connect to your TDAI-1120 in different
ways:
Use the Lyngdorf remote application to discover the device and enter the homepage. In the setup menu, you
will be able to find the network device address and a direct link to the setup page on your internet browser.
If you do not want to install the Remote Control Application, you can type the following in a browser on any
device on your network:
tdai1120.local.
Lyngdorf Audio TDAI-1120 – Owner's manual
12