Setup Guide; Tips For Setting Up Speakers - Lyngdorf Audio TDAI-2170 Owner's Manual

Setup guide

When starting up the TDAI-2170, you will be
prompted to start the setup guide. This tip sheet
will provide setup guide help.
When connecting the speakers, always connect "+" and
"-" from the amplifi er to the corresponding "+" and "-"
terminals on the speaker.
Warning: Never connect the TDAI-2170´s speaker output
to other amplifi ers' output terminals, a setting also known
as bridge mode.
10
ANALOG AUDIO MODULE HDMI MODULE RIGHT LEFT
INPUT OUTPUT
L
HDMI 1 HDMI 3
R
A3 A4 A5 A6 RIGHT A6 LEFT HDMI 2 HDMI 4 OUT CLASS 2 WIRING
ANALOG DIGITAL TRIGGER
IN
INPUT OUTPUT D1 INPUT OUTPUT
USB MODULE
L USB AUDIO IN
R
A1 A2 MICROPHONE D2 D3 D4 D5 D6
SW RS232 TRIGGER
UPDATE OUT TDAI 2170

Tips for setting up speakers

Tip: With hard fl oors, you can reduce refl ections from the fl oor by positioning a carpet between you and
the speakers. With hard surface walls, you can use a painting, a book shelf, or other furnishings.
Find the position of the diffusers by having someone hold a mirror against the wall opposite the speaker.
When you can see the speaker in the mirror from the listening position, you have found the optimal
position for the diffuser.
Stereo triangle
You can use the stereo triangle as a good rule
of thumb when determining where to place your
speakers. The distance between the speakers should
be the same as the distance from your listening
position to both speakers.
11