Delta HES Series Instructions For Use Manual page 73


Pressure Command Rising/ Descending S1 curve
Control mode VF
Settings
 Pressure Command Rising/ Descending S2 Curve
Control mode VF
Settings
 To increase the smoothness at start or stop while increasing or decreasing the percentage of
the pressure command. The longer the pressure reference time, the smoother it will be.

Pressure Command Rising/ Descending S1 Curve
Control mode VF
Settings

Flow Command Rising/.Descending S2 Curve
Control mode VF
Settings
 To increase the smoothness at start or stop while increasing or decreasing the percentage of
the flow command. The longer the flow reference time, the smoother it will be.
FOCPG FOCPM
0~1000ms
FOCPG FOCPM
0~1000ms
FOCPG FOCPM
0~1000ms
FOCPG FOCPM
0~1000ms
Chapter 4 Parameter Functions
4-21
HES Series
Factory default : 0
Factory default : 0
Factory default : 0
Factory default : 0