Process Image In Easy Mode; Input Data In Easy Mode; Table 40: Fieldbus-Dependent Pi Size - WAGO MOVILINK SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-5204 MOVILINK® Interface (RS-232, RS-485)
Pos : 37 /Serie 767 ( WAGO-SPEED WAY)/Proz ess abbild/I/O-Module/Proz ess abbil d 767-5204 Ei n- und Ausg angs daten @ 14\mod_1357824048172_21.doc x @ 108274 @ 233233 @ 1
8.1

Process Image in Easy Mode

The input and output data in Easy mode is displayed in Intel format.
8.1.1

Input Data in Easy Mode

The process image for the process data sent to the fieldbus coupler from the
module is:

Table 40: Fieldbus-dependent PI size

Item No. Fieldbus
767-1101 PROFIBUS
767-1201 PROFINET IO 9 bytes
767-1301 MODBUS
767-1311 sercos
767-1401 DeviceNet
767-1501 CANopen
767-2301 MODBUS
767-2501 CANopen
The structure of the bytes is shown in the following table:
Manual
Version 1.1.0
PI Size
10 bytes
9 bytes
Ethernet/IP 9 bytes
9 bytes
10 bytes
9 bytes
10 bytes
9 bytes
Ethernet/IP 9 bytes
10 bytes
Process Image
Remark
With synchronous diagnostics, cannot
be parameterized
Without synchronous diagnostics,
cannot be parameterized
Without synchronous diagnostics,
cannot be parameterized
Without synchronous diagnostics,
cannot be parameterized
Without synchronous diagnostics
With synchronous diagnostics
(configurable via SSDML)
Without synchronous diagnostics,
cannot be parameterized
Including diagnostics (10 bytes are
available on the fieldbus including one
byte for diagnostics. Depending on the
parameterization, asynchronous or
synchronous diagnostics. On the
fieldbus, the difference is only in the
response time.)
Without synchronous diagnostics,
cannot be parameterized
Without synchronous diagnostics,
cannot be parameterized
Including diagnostics (10 bytes are
available on the fieldbus including one
byte for diagnostics. Depending on the
parameterization, asynchronous or
synchronous diagnostics. On the
fieldbus, the difference is only in the
response time.)
67