9.2.2.1.5 Using Message Type 8 In Mailbox Mode; Figure 25: Compilation Of Movilink ® Address For Type 8 Messages - WAGO MOVILINK SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-5204 MOVILINK® Interface (RS-232, RS-485)

9.2.2.1.5 Using Message Type 8 in Mailbox Mode

This message type can be used to access up to 10 individual converters or up to 4
converter groups per interface. This message type contains MOVILINK
data for two converters that is transmitted simultaneously via the fieldbus of the
higher-level master system. Control of the individual converters or converter
groups connected to both interfaces is optimized in terms of time.
The individual converters can be configured with MOVILINK
... 9.
In addition, several converters can be grouped using MOVILINK
addresses 100 ... 103.
Figure 25: Compilation of MOVILINK
Manual
Version 1.1.0
®
address for type 8 messages
MOVILINK® Interfaces
®
user
®
slave addresses 0
®
group
93