Figure 19: Connectors Of Sensors/Actuators - WAGO MOVILINK SPEEDWAY 767 Manual

52 Connecting Data and Supply Cables
Pos : 24.30 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Sens oren/Aktoren 767- 520x allgemein @ 12\mod_1329747535343_21.doc x @ 89345 @ @ 1
To connect the sensors/actuators to the digital inputs and outputs, proceed as
follows:
1. Disconnect the power supply from those devices on which you have
mounted the module.
2. Insert the plug of the sensor or actuator cable into the socket of a digital
input/output (4) of the module and tighten it using the knurled-head screw.
3. Screw a protective cap on all unused connections to ensure that the IP67
degree of protection is adhered to.
Pos : 24.31 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlüs se_4xM12_Sensor en/Aktor en (unten) - Bild @ 12\mod_1329735724663_21.doc x @ 89289 @ @ 1
4

Figure 19: Connectors of sensors/actuators

Pos : 25 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
767-5204 MOVILINK® Interface (RS-232, RS-485)
4
WAGO-SPEEDWAY 767
Manual
Version 1.1.0