Effect Of Operating State On Outputs; Configurable Functions Of The Movilink ® Interfaces; Configurable Functions Of The Digital Inputs/Outputs; Diagnostics - WAGO MOVILINK SPEEDWAY 767 Manual

WAGO-SPEEDWAY 767
767-5204 MOVILINK® Interface (RS-232, RS-485)
3.7.9

Effect of Operating State on Outputs

Table 16: Technical data − Operating states
CPU stop of PLC
Interruption of field bus
Interruption of S-BUS
Supply voltage under rated voltage
tolerance
Interruption of supply voltage
Output operation
Overload behavior
3.7.10 Configurable Functions of the MOVILINK
Table 17: Technical data − Configurable functions of the MOVILINK
Operating mode (module)
Type (per channel)
Baud rate (per channel)
3.7.11

Configurable Functions of the Digital Inputs/Outputs

Table 18: Technical data − Configurable functions of the digital inputs/outputs
Operating mode (per module)
Input filter (per channel)
Inversion (per channel)
Substitute value strategy (per
channel)
Substitute value (per channel)
Manual mode (per channel)
Manual mode value (per channel)
Online simulation (by channel)
Online simulation (per
channel/module)
3.7.12

Diagnostics

Table 19: Technical data − Diagnostics
Per module
Per channel
Per module
Manual
Version 1.1.0
Device Description
Acc. to substitute value strategy
Acc. to substitute value strategy
0 V status
0 V status
0 V status
Non-retentive
Automatic restart
®
Interfaces
®
Easy mode (channel 1) /
easy mode (channel 2) /
mailbox mode
RS-232 /
RS-485 (half duplex)
9600 Baud /
57600 Baud
DO / DI / DIO
0.1 / 0.5 / 3 / 15 / 20 ms / filter off
ON / OFF
Switch substitute value / keep last value
0 / 1
ON / OFF
0 / 1
Lock / unlock, simulation value: 0 / 1
Diagnostics
Short circuit/overload of field supply
Overtemperature (DO)
Undervoltage (U + U
LS
27
interfaces
)
A