Adm Soft Keys - Graco E-Flo iQ Operation Manual

ADM Display Details

ADM Soft Keys

Icon
Pump Operation Icon
Green: Start the Pump
Inverted Green: Stop the Pump
Red with Border (enabled): Indicates
that the pump cannot be started due to
an alarm.
Red with No Border (not enabled):
Indicates that the system is not enabled
and the pump cannot be started.
Yellow: Indicates that the pump has an
active alarm but still allows the valve
and platen to be depressurized. The
pump can still be primed only if it is a
"pump not primed" alarm.
Enter or exit editing mode for a
particular screen.
Access the Style Definitions screens.
Access the Pump Setup screens.
Access the Heat Setup screens.
Access the Diagnostics function.
Access the Events logs.
Access the Errors logs.
Access the Job Log.
Access the Troubleshooting function.
Access the System Setup screen.
20
Function
Icon
Access the Advanced System Setup
screens.
Access the Maintenance function.
Access the Fieldbus Gateway Setup
screens.
Access the Integration Feedback
screens.
Globalize selection. Apply a style setting
to all of the styles in Style Definitions or
a heat setting to all of the heat zones in
Heat Settings.
Confirm globalizing a setting.
Cancel globalizing a setting.
Access a keyboard screen to create or
change a style name.
Reset offsets to zero when calibrating
pressure transducers.
Tandem systems only. Toggle between
Pump 1 and Pump 2.
Local / Remote control toggle.
Pump is locked in remote control via
fieldbus interface.
Enter or exit pump priming mode. A "1"
or "2" will show on the icon in Tandem
systems to indicate which pump will be
primed.
Enter or exit drum depressurization
mode. (If equipped with optional fluid
solenoid.) A "1" or "2" will show on the
icon in Tandem systems to indicate
which pump will be depressurized.
Enter or exit valve depressurization
mode.
Turn heat zones on and off.
Function
333587B