Advanced Display Module (Adm) - Graco E-flo iQ 26B543 Installation-Parts

Supply Unit Component Identification

Advanced Display Module (ADM)

Front and Rear Views
CA
CH
CG
CJ
F . 6: ADM Component Identification
IG
Key:
CA Startup/Shutdown
Starts up or shuts down the system. Toggles
between Active and Inactive system.
CB System Status Indicator LED
CC Pump Soft Stop
Stops all pump processes and disables the pump.
Also stops all heating processes and disables the
heat. This is not a safety or emergency stop.
CD Soft Keys
Defined by the icon on the screen next to the soft
key. Performs the specific operation for that icon
when pressed.
CE Cancel
Cancels a selection or number entry while in the
process of entering a number or making a selection.
Cancels the pump processes. Exits a screen
without saving changes.
CF Enter
Select to update a field, accept a selection or value,
acknowledge an event, enter a screen, and toggle
selected items.
14
CB
CC
CD
CE
CF
CP
CG Lock/Setup
CH Directional Keypad
CJ Numeric Keypad
CK Part Number Identification Label
CL USB Interface
CM CAN Cable Connection
CN Module Status LEDs
CP Token Access Cover
CR Battery Access Cover
CS Light Tower Connection
NOTE: If using a tandem system, the ADM is only
included with the iQ Ram Supply Unit 1 (A).
CR
CS
Toggles between Run screens and the iQ Menu.
Navigate within a screen or to a new screen.
Input numeric values.
Power and communication.
Visual indicators to show the status of the ADM.
Access cover for blue software token.
CK
CL
CM
CN
3A8217A