Table of Contents
Advertisement
USB Data
Create Custom Language
Strings
The custom language file is a tab-delimited text file that
contains two columns. The first column consists of a list
of strings in the language selected at the time of
download. The second column can be used to enter the
custom language strings. If a custom language was
previously installed, this column contains the custom
strings. Otherwise the second column is blank.
Modify the second column of the custom language file
as needed and the follow the Upload Procedure on this
page to install the file.
The format of the custom language file is critical. The
following rules must be followed for the installation
process to succeed.
•
Define a custom string for each row in the second
column.
NOTE: If the custom language file is used, you must
define a custom string for each entry in the
DISPTEXT.TXT file. Blank second-column fields will
be displayed blank on the ADM.
•
The file name must be DISPTEXT.TXT.
•
The file format must be a tab-delimited text file using
Unicode (UTF-16) character representation.
•
The file must contain only two columns, with
columns separated by a single tab character.
•
Do not add or remove rows to the file.
•
Do not change the order of the rows.
66
Upload Procedure
Use this procedure to install a system configuration file
and/or a custom language file.
1. If necessary, follow the Download Procedure on
page 64 to automatically generate the proper folder
structure on the USB flash drive.
2. Insert a USB flash drive into the USB port of
computer.
3. The USB flash drive window automatically opens. If
it does not, open the USB flash drive from within
Windows Explorer.
4. Open the GRACO folder.
5. Open the system folder. If working with more than
one system, there will be more than one folder
within the GRACO folder. Each folder is labeled with
the corresponding serial number of the ADM (the
serial number is on the back of the module).
6. If installing the system configuration settings file,
place the SETTINGS.TXT file into the UPLOAD
folder.
7. If installing the custom language file, place the
DISPTEXT.TXT file into the UPLOAD folder.
8. Remove the USB flash drive from the computer.
9. Install the USB flash drive into the ADM USB port.
10. The Menu Bar and USB indicator lights indicate that
the USB is downloading files. Wait for USB activity
to complete.
11. Remove the USB flash drive from the USB port.
NOTE: If the custom language file was installed, you
can select the new language from the Language
drop-down menu in Advanced Setup Screen 1 on page
31.
333587B
Advertisement
Table of Contents
