Table of Contents
Advertisement
ADM LED Status Descriptions
LED
System Status
Green Solid
Green Flashing
Yellow Solid
Yellow Flashing
USB Status (CL)
Green Flashing
Yellow Solid
Green and Yellow Flashing
ADM Status (CN) Green Solid
Yellow Flashing
Red Steady Flashing
Red Random Flashing or Solid
ADM Icons
Icon
Alarm - See Troubleshooting, page 53
for more information.
Deviation - See Troubleshooting, page
53 for more information.
Advisory - See Troubleshooting, page
53 for more information.
Target for primary pressure and flow.
Only displayed in priming mode.
Communication Error
No issues found with parameter or
setting value
Missing or unexpected parameter or
setting value
System is processing request
(animated)
Pump position (animated). The pump
coupler will move up and down in real
time and indicate the approximate
position of the pump. The pump will
need to complete one full down stroke
upon each power cycle before the
position is valid.
333587B
Conditions
Function
Description
Run Mode, System On
Setup Mode, System On
Run Mode, System Off
Setup Mode, System Off
Data recording in progress
Downloading information to USB
ADM is busy, USB cannot transfer information
when in this mode
Power applied to module
Active Communication
Software upload from token in progress
Module error exists
Icon
Zone setpoint temperature showing the
temperature the zone heats too when
the heat is turned on.
Zone setback temperature showing the
setback the zone goes to when the heat
is in setback mode.
ADM Display Details
Function
19
Advertisement
Table of Contents
