Setting Up In The Remote Software - OM POWER OM2000A+ Manual

You can change the OM2000A+ Port number too, if you need / want in the Connection menu. When done, click
OK.
When done, click Apply Settings in menu.

7.5.2 Setting up in the Remote software

In the Remote Control software open Settings
and enter the IP Address and Port number that
you set in point 7.5.1.
Type of supported TCVR and working
Click enter, when done. Now you are ready to
work with OM2000A+ over the internet.
frequency are visible on the display.
45
AUTO LED is ON.