Om2000A+ Remote Control - OM POWER OM2000A+ Manual

Close both windows. (USB adapter connect trough null modem cable to TCVR port on OM2000A+).
7.4.

OM2000A+ Remote Control

The OM Power team developed special software which allows control the PA OM2000A+ remotely. Download it
from the official OM Power website
then open software.
The software allows user:

Switch PA ON and OFF

Switch between STBY and OPERATE

Switch between preprogrammed antennas

Read and reset last 20 warnings and fault statuses

Fine tuning of the PA

To check almost all operation parameters of the PA
In the CAT SETTINGS menu select FLEXRADIO, baud rate
9600 and press SET.
http://www.om-power.com/downloads. First unzip the downloaded file,
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
39