Setting Up In The Remote Software - OM POWER OM2000A+ Instruction Manual

You can change the OM2000A+ Port number too, if you need / want in the Connection menu. When
done, click OK.
When done, click Apply Settings in menu.

7.5.2 Setting up in the Remote software

In the Remote Control software open
Settings and enter the IP Address and Port
number that you set in point 7.5.1.
Click enter, when done. Now you are
Type of supported TCVR and working
ready to work with OM2000A+ over the
frequency are visible on the display.
internet.
AUTO LED is ON.
45