OM POWER OM2000A+ Manual page 27

Or another value of EBS2 by MANUAL Set.
Type of supported TCVR and working
frequency are visible on the display.
Scroll to CALIBRATION Ip, Is and press SET.
Calibration will be done automatically.
Type of supported TCVR and working
Go to the bottom line.
frequency are visible on the display.
This feature allows user to switch OFF the SWR
protection.
Type of supported TCVR and working
We recommend to set it ON (SWR protection circuit
frequency are visible on the display.
will stay active, max. allowed SWR is 3:1). If OFF is
selected, higher SWR is allowed, but reflected power
is measured. If it exceeds 350W, transmit will be
blocked.
Press EXIT.
AUTO LED is ON.
AUTO LED is ON.
AUTO LED is ON.
27