OM POWER OM2000A+ Manual page 33

In the case of some hardware failure or if your power amplifier is not working properly, please contact the
manufacturer or your dealer.
Never try to change or move any part inside the amplifier except of tube or fuses. Substitution of
parts may void intrinsic safety!
Manufacturer's contacts:
Dealer in the USA:
OM POWER, s.r.o.
930 30 Báč 126
SLOVAKIA
Email: om-power@om-power.com
Array Solutions
2611 North Belt Line Road
Suite # 109
Sunnyvale, TX 75182
Tel: (214)954-7140
Email: sales@arraysolutions
This an example from previous attempt, when
Type of supported TCVR and
antenna was disconnected from the PA during
transmitting.
frequency are visible on the
Reflected power was higher than 250W,
warning message "Reflected power too high"
appeared.
If you touch the yellow box, warning details will
Type of supported TCVR and
be visible.
frequency are visible on the
.
com
working
display.
AUTO LED is ON.
working
display.
AUTO LED is ON.
33