Operation Mode - OM POWER OM2000A+ Manual

5.4.

Operation mode

Before switching to operation mode, check all connections between PA and TCVR.
We are back in the Main display, bar graphs
Type of supported TCVR and working
were defined, antennas were preprogrammed,
frequency are visible on the display.
CAT was set. We are ready to go to the
operation mode.
Press shortly black STBY/OPER button on the
front panel.
We are in the operation mode.
Type of supported TCVR and working
Press MENU.
frequency are visible on the display.
Now try to press PTT (foot switch for
Type of supported TCVR and working
example).
frequency are visible on the display.
We are in the transmit mode (without RF).
We have new button here. M-TUNE.
AUTO LED is ON.
AUTO LED is ON.
AUTO LED is ON.
28