OM POWER OM2000A+ Manual page 18

Use next lines and set brightness and sound
Type of supported TCVR and working
volume (use up/down and left/right). Confirm
frequency are visible on the display.
with SAVE.
Press NETWORK SETTING and then press
Type of supported TCVR and working
ENTER.
frequency are visible on the display.
Here the user have possibility to set IP Address,
Type of supported TCVR and working
Network mask, Default gateway, Port number.
frequency are visible on the display.
User can enable or disable IP parameter setting
via LAN connection.
AUTO LED is ON.
AUTO LED is ON.
AUTO LED is ON.
18