Safety Instructions - OM POWER OM2000A+ Manual

2.

SAFETY INSTRUCTIONS

DANGEROUS HIGH VOLTAGE INSIDE!
The power amplifier is using high voltage up to 3200V DC, which is very dangerous for human life! Read next
safety instructions carefully first, before you will start to install and operate power amplifier! NEVER VIOLATE
NEXT RULES!
NEVER ALLOW CHILDREN to play around PA or to touch power amplifier or connected cables in working
condition, or to push anything into the case holes!
Never turn the amplifier on without the upper lid in place. DO NOT ATTEMPT TO SHORT OR BYPASS safety
switch under upper lid!
The OM2000A+ amplifier is neither to be used in a WET or HUMID environment nor to be exposed to RAINFALL!
Do not turn the amplifier ON without having connected the ANTENNA or properly rated DUMMY LOAD! A
hazardous HF voltage may build up on the antenna connector after turning the amplifier on with no antenna or
dummy load connected!
Before opening the upper lid of the amplifier make sure that power supply has been disconnected AT LEAST 10
minutes allowing the electrolytic capacitors to discharge fully. Disconnect power cord from the outlet!
Any work inside the PA (internal fuses replacement, tube replacement, etc.) can be carried out only by
professionally qualified person!
6