Remote Control Using Own Public Ip Address; Changing Om2000A+ Connection Settings - OM POWER OM2000A+ Manual

Shortwave plus 50 mhz power amplifier

Hide thumbs Also See for OM2000A+:

Table of Contents

7.5.

Remote Control using own public IP address

Connect LAN connector on OM2000A+ to PC with ethernet cable.

Open up a WEB browser and enter the OM2000A+ current IP address (default is 192.168.1.211).

Open Network menu and change the IP address, Subnet mask, Default Gateway and DNS Server settings to the

ones given by the internet provider. When done, click OK.

An authentication window will show up. Leave the

fields empty and click OK.

Type of supported TCVR and working

frequency are visible on the display.

AUTO LED is ON.

Table of Contents

Do you have a question about the OM2000A+ and is the answer not in the manual?