Beverly Tourer 300 i.e.
Specification
Voltage
Starter motor
KEY
1. Starter motor
2. Starter remote control
3. Battery
4. Fuse No. 1
5. Key switch contacts
6. Fuse No. 7
7. Stop buttons
8. Starter button
9. Injection ECU
WARNING
ALL CONTINUITY TESTS MUST BE CARRIED OUT WITH THE CORRESPONDING CONNECTORS
DISCONNECTED.
1) Check if there is continuity of the Red cable connecting the battery, the start-up remote control switch
and the starter motor.
2) Check fuses No. 1 and 7, the key switch contacts, the stop buttons and the starter button.
3) Check the start-up remote control switch.
VOLTAGE REGULATOR/RECTIFIER
Type
Desc./Quantity
Non-adjustable three-phase transistor
14 to 15V at 5000 rpm with lights off
Electrical system
ELE SYS - 93