PIAGGIO Beverly Tourer 300 i.e. Service Station Manual page 102

Electrical system
12.8 - 13.15 V Bring the battery to full charge, us-
ing the 020648Y battery charger:
a - select the type of battery with the red switch on
the left of the panel battery charger panel
b - select NEW on the yellow timer
c - connect the clamps of the battery charger to the
battery poles (black clamp to negative pole (-) and
red clamp to positive pole (+)).
d - Press the red button, as shown in figure.
e - Press the "MF" black button to activate the bat-
tery recharge Maintenance Free as shown in fig-
ure.
f - Check the ignition of the green LED indicated
with a red arrow in figure.
ELE SYS - 102
Beverly Tourer 300 i.e.