PIAGGIO Beverly Tourer 300 i.e. Service Station Manual page 263

Beverly Tourer 300 i.e.
Instrument panel
- Remove the rear handlebar cover.
- Undo the four screws shown in the picture.
- Remove the instrument panel.
See also
Rear handlebar cover
Front handlebar cover
- Remove the rear handlebar cover.
- Disconnect the electrical connectors of the head-
lamp and turn indicators.
- Undo the five screws indicated and remove the
headlight assembly and the front handlebar cover.
- During the fitting stage, make sure that the re-
tainer clamp indicated is placed correctly.
Headlight assy.
Chassis
CHAS - 263