PIAGGIO Beverly Tourer 300 i.e. Service Station Manual page 105

Beverly Tourer 300 i.e.
PICKUP CONNECTOR
1.Engine speed sensor ECU positive (Red)
2.Engine speed sensor ECU negative (Brown)
3. Oil pressure sensor (White-Pink)
ANTITHEFT DEVICE PRE-INSTALLATION
CONNECTOR
1. Left turn indicator bulbs (Pink)
2. Right turn indicator bulbs (White-Blue)
3. Ground lead (Black)
4. Battery-powered (Blue)
5. Live power supply (White)
6. Helmet compartment light (Red-Yellow)
7. Not connected
8. Not connected
2-PIN CONNECTOR ONLY
1 Sky blue-black positive from control unit
2 White-Green negative from control unit
VOLTAGE REGULATOR CONNECTOR
1. Battery positive (Red-Black)
2. Ground lead (Black)
3. Battery positive (Red-Black)
4. Ground lead (Black)
INJECTION ELECTRONIC CONTROL UNIT
CONNECTOR
1. Injection telltale light (Brown-Black)
2. Not connected
3. Not connected
4. Lambda probe negative (White-Green)
5. Live (Red-White)
6. Battery-powered (Orange-Black)
Electrical system
ELE SYS - 105