PIAGGIO Beverly Tourer 300 i.e. Service Station Manual page 154

Engine
- Fit the timing chain guide slider.
- Insert the centring dowel between the cylinder
head to the cylinder, fit the cylinder head gasket
and the cylinder head.
- Lubricate the stud bolt threading.
- Tighten up the nuts to an initial pre-torque of 7±1
N·m
- Tighten up the nuts to a second pre-torque of 10
±1 N·m
- Rotate by an angle of 270°
- To carry out the operations described above, fol-
low the tightening sequence in the figure.
ENG - 154
Beverly Tourer 300 i.e.