PIAGGIO Beverly Tourer 300 i.e. Service Station Manual page 276

Pre-delivery
Carry out the listed tests before delivering the vehicle.
Warning - Handle fuel with care.
Aesthetic inspection
Appearance check:
- Paintwork
- Fitting of plastics
- Scratches
- Dirt
Tightening torques inspection
- Visually check that there is a yellow mark on the following clamps:
FRONT SUSPENSION
•
Front wheel pin nut.
•
Screws fixing wheel pin on right fork leg.
FRONT BRAKE
•
Screws fixing front brake callipers to fork.
•
Brake pipes / front brake calliper coupling.
REAR SUSPENSION
•
Rear wheel tightening screws.
•
Lower shock absorber retainer.
•
Nuts fixing muffler supporting arm - engine.
•
Screws fixing muffler to supporting arm.
•
Rear wheel pin nut.
REAR BRAKE
•
Screws fixing rear brake calliper to supporting plate.
•
Brake pipe to rear brake calliper coupling.
•
Screws fixing supporting plate to engine.
Electrical system
• Main switch
• Lights: high-beam lights, low-beam lights, taillights (front and rear) and relevant warning lights
- Headlight adjustment according to the regulations currently in force
• Front and rear stop light buttons and relative light •Turn indicators and relative telltales
• Instrument lighting
• instruments: fuel and temperature indicator
PRE DE - 276
Beverly Tourer 300 i.e.