PIAGGIO Beverly Tourer 300 i.e. Service Station Manual page 11

Beverly Tourer 300 i.e.
Brakes
Specification
Front brake
Rear brake
Wheels and tyres
Specification
Wheel rim type
Front wheel rim
Rear rim
Front tyre
Rear tyre
Front tyre pressure (with passenger)
Rear tyre pressure (with passenger)
N.B.
CHECK AND ADJUST TYRE PRESSURE WITH TYRES AT AMBIENT TEMPERATURE. REGU-
LATE PRESSURE ACCORDING TO THE WEIGHT OF BOTH RIDER AND ACCESSORIES
Tightening Torques
Handlebar fixing screw (*)
Fixing screws for the handlebar control unit U-bolts
Steering tube upper ring nut
Steering tube lower ring nut
Centre stand bolt
Side stand fixing bolt
Refer to the table in section "Suspensions/Swinging arm/Fitting" for the tightening torques of the swinging arm.
Front wheel axle
Fork leg screw
front mudguard to plate fixing screw
Fixing screw for mudguard plate to fork
Stem support clamp tightening screws
Fork locking screws cap
Hydraulic rod fixing screw
Rear wheel axle
Fixing screw for wheel rim to hub
Right shock absorber lower retainer
Left shock absorber lower retainer
Muffler mounting arm to engine screws (*)
BRAKES
WHEELS AND TYRES
STEERING
Name
CHASSIS
Name
FRONT SUSPENSION
Name
REAR SUSPENSION
Name
Desc./Quantity
Ø 260-mm disc brake with hydraulic control activated by han-
dlebar right-side lever.
Ø 260-mm disc brake with hydraulic control activated by han-
dlebar left-side lever.
Desc./Quantity
Light alloy wheel rims.
16'' x 3.00
16 x 3.50''
Tubeless, 110/70 - 16'' 52P
Tubeless, 140/70 - 16'' 65P
2 bar (-)
2.5 bar (-)
Torque in Nm
45 to 50
7 to 10
40 ÷ 45
14 ÷ 17
Torque in Nm
40 ÷ 45
40 ÷ 45
Torque in Nm
45 to 50
6 ÷ 7
4.5 ÷ 7
9 ÷ 11
20 to 25
15 ÷ 30
25 ÷ 35*
Torque in Nm
104 to 126
34 ÷ 38
40 ÷ 45
33 ÷ 41
20 ÷ 25
Characteristics
CHAR - 11